Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Lubes/Cleaners

Park Tool Chain Gang Chain Cleaning System
$57.99
Park's Chain Gang contains everything needed to quickly and easily clean chains, cassette/freewheel cogs and chainrings so that your shifting works perfectly and your parts last and last. You get Park's Cyclone Chain Scrubber, GearClean Brush, and their CB-2 Citrus ChainBrite (8-ounce bottle). Simply fill the Cyclone Chain Scrubber to the line with ChainBrite, snap the cleaner onto the chain, hold the cleaner's handle and pedal your bike by hand. Like magic, the brushes inside the cleaner turn and scrub the chain clean (a magnet in the bottom retains any metal bits that come off the links). Then to finish the job, simply use Park's brush and some rags to clean the cogs and chainrings.
Park Tool PolyLube 1000 16-Ounce
$29.99
Park's PolyLube is specifically formulated to protect bearing components. Its Polyurea grease has extremely high shear strength to protect bottom brackets, headsets, pedals and hubs. Use it on threads, seatposts, stems and cables, too. It's also safe for fork seals, and repels water.
Park Tool RC-1 Press Fit Retaining Compound
$25.99
Fills gaps and helps retain non-threaded parts like Press-fit bottom bracket parts, sealed bearings etc. Notice: Park Tool AP-1 Adhesive Primer must be used to prep all components, fasteners and carbon fiber surfaces prior to application of Park Tool threadlockers or retaining compound. Failure to do so could result in permanently bonded parts.
Park Tool Synthetic-Blend Chain Lube
$12.99
Keep your chain running smoothly with Park's Synthetic-Blend Chain Lube. It uses PTFE and a proprietary blend of oils to penetrate, reduce friction, prolong chain life, displace moisture and protect chains from rust and corrosion. Plus, it works great on cables, spokes, and derailleur and brake pivots, too.
Park Tool TLR-2 High Strength Threadlocker
$25.99
Threadlockers lock threaded assemblies and keep them from loosening. Notice: Park Tool AP-1 Adhesive Primer must be used to prep all components, fasteners and carbon fiber surfaces prior to application of Park Tool threadlockers or retaining compound. Failure to do so could result in permanently bonded parts.
Page 1 of 1