Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Chainrings

e*thirteen by The Hive Guidering M (Narrow/Wide) Chainring
$66.99
- Guidering M to fit any 4x104mm BCD crank - Dual width "M" (narrow/wide) tooth profile engages the chain securely even at extreme angles - 7075-T6 aluminum construction optimized for all chainguide systems to prevent chain jamming - 1mm swappable chainline
Wolf Tooth Components 104 BCD Stainless Steel Chainrings
$165.99
416 stainless steel is not the first material choice for most component manufactures looking to use stainless steel (most use soft 300 series). That is because 416 is hard...hard because the raw billet is expensive, hard because it takes a long time to machine. However, that did not stop Wolf Tooth because there is no denying that it is the best material for those that need the ultimate durability in a chainring. These stainless steel chainrings are not only beautiful, but they will last 5-10 times longer than their aluminum versions. Compatibility: - These are functionally the same as the aluminum 104 BCD rings. - These rings fit any 104 BCD crankset. - 30t x 104 ring is the only Quarq power meter compatible 30t ring available. - For 1x9, 1x10, 1x11 and 1x12 drivetrains (including SRAM Eagle) - Compatible with all 10, 11, and 12 speed chains (Including SRAM Eagle) - If using a 9 speed drivetrain use a 10 speed chain (shifts and works well on a 9 speed drivetrain and fits the ring tighter for better chain retention). - Provide a great chainline on most boost bikes
Wolf Tooth Components 110 BCD Asymmetric 4-Bolt for Shimano Cranks
$129.99 - $142.99
Wolf Tooth was first to market with Cyclocross 1x specific chainrings because we saw Cyclocross as the perfect use for our patent pending Drop-Stop technology. These beautifully machined 110 BCD Asymmetric 4-bolt chainrings are optimized for your 1x Shimano CX/ Road/ Gravel drivetrain whether you run Dura Ace 9000, Ultegra 6800, 105 5800, or Tiagra 4700. They are also offset for the ideal 1x chainline. Compatibility: - These rings are for use with 110 BCD Asymmetric 4-bolt cranks. - Compatible with Dura Ace 9000, Ultegra 6800, 105 5800, Tiagra 4703, and Tiagra 4700 - Sizes 38T and larger are compatible with Dura Ace 9100, Ultegra 8000 and 105 R7000 but a slight modification is required due to a change in the crank arm profile. The 36T chainring will not work for this modification. - Mounts in the big ring position of the cranks but is offset inward for perfect chainline. - The stock 2x bolts will not work. You will need 6mm bolts which are optimized for single ring mounting. - For 1x9, 1x10, 1x11 and 1x12 drivetrains including SRAM Eagle (TM) - Compatible with all 10, 11, and 12 speed chains including SRAM Eagle (TM) - If using a 9 speed drivetrain use a 10 speed chain (shifts and works well on a 9 speed drivetrain and fits the ring tighter for better chain retention).
Wolf Tooth Components 5-Spoke GXP Direct Mount Ring
$116.99
Wolf Tooth's SDM chainrings replace your existing spider and chainring with one clean looking, light weight, and stiff piece of machined billet. These come in 3 different offsets: standard GXP, Boost and BB30. Compatibility: - These direct mount chainrings will replace your existing chainring and spider, which is attached via 3 bolts on the back side of the spider near the spindle. You will use these same 3 bolts to attach the Wolf Tooth SDM chainring. There are 3 offsets: 0mm, 3mm, and 6mm - 49mm chainline, 0mm offset for BB30 short-spindle cranks - 52mm chainline, 3mm offset BB30 - 47mm chainline, 6mm offset for cyclocross and road cranks - 49mm chainline, 6mm offset for GXP and long spindle BB30 Boost Notes for use with Fat Bikes: - If you are planning to use this on an X9 or XX1 fat bike crankset with a 190/197 rear hub spacing use the 0 offset ring. - If your fat bike has a 170/177 rear hub spacing, use the Standard 6mm offset
Wolf Tooth Components 64 BCD Chainrings
$109.99
The Wolf Tooth 64 BCD Universal Chainring is the perfect solution when you need something smaller than a 30t on your 104/64 BCD cranks or your 11-speed Shimano XT and SLX 96/64 BCD cranks. - Features Wolf Tooth's Drop-Stop tooth design for maximum chain retention - For use with 1x9, 1x10, 1x11 and 1x12 drivetrains (including SRAM Eagle) - Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains - Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings - If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention - Made from 7075-T6 aluminum for long life - Chainline is 46mm on a triple and 48mm on a double crank - Chainline on a standard M8000 or M7000 crankset is 48mm and 50mm on a boost version
Wolf Tooth Components 64/104 Chainring
$102.99 - $109.99
- Standard 4-bolt ring with Drop-Stop tooth design to prevent unwanted chain drop - Recommended for use with 10 or 11sp chain (10sp chain works on 9sp drivetrain) - Designed and manufactured in the USA from 7075-T6 aluminum alloy - 36g (30t)
Wolf Tooth Components Direct Mount Boost Chainring for Race Face Cinch
$116.99
These chainrings are for Race Face Cinch cranks such as Turbine, Next SL, Sixc & Aeffect. The Wolf Tooth Cinch rings feature a our patented Drop-Stop design for the best wear life, chain retention and mud clearance. - CNC machined aluminum ring fits Race Face cranks with Cinch System - Features Drop-Stop tooth design to prevent unwanted chain drop - Asymmetrical tooth shape for the best wear life, chain retention and mud clearance - Recommended for use with 10 or 11sp chain (10sp chain works on 9sp drivetrain) - Made in the USA from 7075-T6 aluminum alloy
Wolf Tooth Components Direct Mount Boost Chainrings for SRAM
$116.99
The direct mount chainrings for SRAM cranksets replace your existing spider and chainring with one clean-looking, lightweight, and stiff piece of machined billet. Wolf Tooth patented Drop-Stop wide/narrow tooth profile for the ultimate chain retention and mud-shedding ability. Compatibility These direct mount chainrings will replace your existing chainring and spider or replace the direct mount ring on SRAM cranksets, including the DUB cranks. The ring is attached via 3 bolts on the back side of the spider near the spindle. Note that the SRAM 12spd Red and Force AXS use a different 8-bolt mounting interface that is not compatible with these chainrings. Specifications: - Boost: 3mm offset for 52mm chainline - Mount type: Direct Mount for SRAM - Offset: Boost - Chain Compatibility: Drop-Stop A tooth profile for all 9, 10, and 11spd chains or 12spd SRAM Eagle, KMC, Connex or Wippermann chains
Wolf Tooth Components Direct Mount Chainrings for Race Face Cinch
$116.99
These chainrings are for Race Face Cinch cranks such as Turbine, Next SL, Sixc & Aeffect. The Wolf Tooth Cinch rings feature a our patented Drop-Stop design for the best wear life, chain retention and mud clearance. We have both Boost and standard chainrings. - CNC machined aluminum ring fits Race Face cranks with Cinch System - Features Drop-Stop tooth design to prevent unwanted chain drop - Asymmetrical tooth shape for the best wear life, chain retention and mud clearance - Recommended for use with 10 or 11sp chain (10sp chain works on 9sp drivetrain) - Made in the USA from 7075-T6 aluminum alloy
Wolf Tooth Components Elliptical 104 BCD Chainrings
$109.99
Designed for 104 BCD Mountain Cranksets. The proprietary design has an ovality of 10% and a timing of 112 degrees after top dead center which provide the benefits of an oval ring without the traditional downsides of oval rings. This chainring features the patent pending asymmetrical Drop-Stop tooth design for the best in wear life, mud clearance, and chain retention. - The simplest way to explain the way these rings feel is having 2 teeth less in the weak part of your pedal stroke and 2 teeth more where you have the most power - Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains - Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains - Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings - If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention - Made from 7075-T6 aluminum for long life - These rings are threaded, use with 10mm chainring bolts - 48mm - 50mm chainline depending on the crankset
Wolf Tooth Components Elliptical 64 BCD Chainrings
$109.99
Designed to fit the inner 64 BCD spacing on 104/64 cranksets, it allows the use of a 30T elliptical ring on a 64/104 crankset. It's best paired with a 104 BCD bashring. - The simplest way to explain the way these rings feel is having 2 teeth less in the weak part of your pedal stroke and 2 teeth more where you have the most power - Features Wolf Tooth's Drop-Stop tooth design for maximum chain retention - Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains - Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains - Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings - If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention - Made from 7075-T6 aluminum for long life - Use of a clutch-style rear derailleur is recommended - Can be used with a 104 BCD alloy bashring
Wolf Tooth Components Elliptical Direct Mount Boost Chainrings for SRAM Cranks
$116.99
The direct mount chainrings for SRAM cranksets replace your existing spider and chainring with one clean-looking, lightweight, and stiff piece of machined billet. Wolf Tooth patented Drop-Stop wide/narrow tooth profile for the ultimate chain retention and mud-shedding ability. More power? Check. Better traction? Definitely. Less shifting? Yup. Funky uneven pedal stroke? Not with Wolf Tooth PowerTrac Elliptical (PTE) chainrings. Our proprietary design means a slightly less ovalized ring (10%) with less aggressive timing (112 degree) than competitors versions; any change to your pedal stroke is unnoticeable for most riders, but they still provide the POWER and TRACTION benefits inherent to oval chainrings. Wolf Tooth patented Drop-Stop wide/narrow tooth profile for the ultimate chain retention and mud-shedding ability. Compatibility These direct mount chainrings will replace your existing chainring and spider or replace the direct mount ring on SRAM cranksets including the DUB cranks. The ring is attached via 3 bolts on the back side of the spider near the spindle. Note that the SRAM 12spd Red and Force AXS use a different 8-bolt mounting interface that is not compatible with these chainrings. Specifications: - Boost: 3mm offset for 52mm chainline - Mount type: Direct Mount for SRAM - Offset: Boost - Chain Compatibility: Drop-Stop A tooth profile for all 9, 10, and 11spd chains or 12spd SRAM Eagle, KMC, Connex or Wippermann chains
Wolf Tooth Components Elliptical Shimano 110 Asymmetric BCD Chainrings
$129.99
Designed to fit 4-arm 110 Asymmetric BCD Shimano Road Cranksets. Its proprietary design has an ovality of 10% and a timing of 112 degrees after top dead center which provide the beneifits of an oval ring such as greater rear wheel traction without the traditional downsides of oval rings. These rings feature the patent pending Drop-Stop asymmetrical tooth design for the best in wear life, mud clearance, and chain retention. The simplest way to explain the way these rings feel is having 2 teeth less in the weak part of your pedal stroke and 2 teeth more where you have the most power Features Wolf Tooth's Drop-Stop tooth design for maximum chain retention Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention Made from 7075-T6 aluminum for long life Use of a clutch-style rear derailleur is recommended May require modification if used with Shimano Dura Ace 9100 or Ultegra 8000 cranksets
Wolf Tooth Components Set of 4 Chainring Bolts for M8 Threaded Chainrings (10mm Long)
$32.99
Wolf Tooth designed these bolts to be the best on the market. They have a 4mm hex socket and are 10mm long so you can use a bash ring with your chainring that has threaded standoffs like the Wolf Tooth 104 BCD 30t ring, Elliptical 104 BCD rings, 76 BCD rings and others. No nuts are included with these bolts as they are intended for use with threaded chainrings. These work great with Wolf Tooth or any other brand threaded M8 x 0.75 chainrings.
Wolf Tooth Components Shimano 104 BCD Chainring
$116.99 - $125.99
104 BCD is the most common bolt pattern on double and triple cranksets and happens to be the first product ever made my Wolf Tooth Components. The Drop-Stop tooth design is the best performing and longest-lasting wide/narrow chainrings on the market. Drop-Stop technology. On Wolf Tooth's patented wide/narrow chainring, the wide side of the tooth has maximum contact on the drive side, which spreads the load and improves chainring life. The narrow side allows clearance for mud and debris, which reduces friction. Alternating wide/narrow tooth pattern prevents chain derailment. Compatibility: - Fits any 104 BCD crankset - Chainring Bolts: All tooth sizes require 1x bolts that are 6mm long, with exception to 30T rings, which are threaded and require bolts that are 7-10mm long - If using a bashring you will need 8mm bolts (most stock bolts on 3x cranksets are 8mm) - 32T 104 BCD chainrings work on many older 2x Shimano crankset (XT, SLX, or Deore) - All sizes of 104 BCD chainrings are compatible with QUARQ power meters - Drivetrains: 1x9, 1x10, 1x11 and 1x12 drivetrains - If using a 9-speed drivetrain, use a 10-speed chain. It fits tighter for better chain retention Specifications: - Mount type: 104 BCD - Chain Compatibility: Drop-Stop ST for Shimano 12spd Hyperglide+ chains
Wolf Tooth Components Shimano M9000/M9020 Chainring
$109.99
- Fits asymmetrical 96mm BCD with built-in threaded standoffs - Used on Shimano XTR M9000 and M9020 crankset (both race and trail models) - Features Drop-Stop tooth design to prevent unwanted chain drop - Mount using the stock Shimano XTR M7 chainring bolts - 49mm chainline for 28-34 tooth and 50mm for 36 tooth - Recommended for use with 10 or 11sp chain (10sp chain works on 9sp drivetrain) - Made in the USA from 7075-T6 aluminum alloy - 41g (30t)
Wheels Manufacturing Inc. Individual Chainring Spacer
$24.99 - $34.99
- For chain and derailleur alignment - 20 per bag
TruVativ 10-speed Chainring for Specialized 24/36T Crankset
$99.99
- Designed for for Specialized 24/36T Crankset - Drivetrain Speeds: 2 x 10 - 104mm BCD
TruVativ Aluminum Chainring
$29.99
Original equipment on SRAM and Truvativ cranks, they also work well with other drivetrains. - Middle chainring, use with 48T outer - 64mm BCD
TruVativ Trushift Alloy Chainring
$119.99
Original equipment on SRAM and Truvativ cranks, these chainrings also work well with other drivetrains. - 104mm BCD - Material: Aluminum
TruVativ X0DH Chainring
$74.99
- For 1x10 drivetrains - 104mm BCD - Material: Aluminum
Specialized Praxis Chainrings
$235.00
Not all chainrings are created equal, and if you need proof of this, look no further than these chainrings that Praxis made exclusively for Specialized. - Custom design Praxis rings For Specialized only - Cold-forged, Heat-treated, and hard anodize 7075 T6 Aluminum - Compatible with Campagnolo, Shimano, and SRAM 10-/11-speed cranksets
Shimano 105 5703 Triple Chainring
$42.99
Shimano 105 5703 10-Speed chainrings are a quality, reliable replacement option for worn out chainrings on triple cranksets.
Shimano Ultegra 6700 B-type Chainring
$239.99
Shimano chainrings offer durability and confidence-inspiring performance, and go a long way towards getting a drivetrain back to optimum working condition. - For best shifting performance B-type rings only with B-type rings
Shimano Ultegra 6750-G Chainring
$239.99
Shimano chainrings offer durability and confidence-inspiring performance, and go a long way towards getting a drivetrain back to optimum working condition. - 6700-G and 6750-G chainrings are OEM for Ultegra "Glossy-Gray" cranksets
SRAM CX1 X-Sync Chain Ring
$137.99
Mud and moving parts are enemies in the sport of cyclocross. That's why SRAM decided they were going to simplify things. Remove the front derailleur, increase the range of the cassette, make dropped chains a thing of the past, and you've got a cross drivetrain worthy of hammering. SRAM's CX1 X-Sync Chain Ring is an integral part of that system. It mates to 110 BCD cranks and features a wide-narrow-wide tooth profile to securely hold the chain through the roughest terrain. It's also specially designed with mud clearing in mind to keep your rig light and fast. A variety of sizes ranging from the spin-to-win 38T to the flat-out 46T let you dial in your rig for your strengths or course.
SRAM Eagle X-Sync 2 Direct Mount Oval Boost Chainring
$170.99 - $176.00
Intense study of chain and chainring wear patterns led to the radical tooth profile that lasts longer, runs quieter and further improves chain retention. Oval ring shape for riders that want to adjust the power profile of their pedal stroke. - The only oval rings with X-Sync 2 tooth design - Direct Mount Type: Direct Mount SRAM - Drivetrain Speeds: 10, 11, 12 - Material: Aluminum - Ring Position/Type: Chain Retaining Single Ring - Round or Oval: Oval - Chainline/Hub Compatibility: 141/148 Boost Hubs
SRAM Eagle X-Sync 2 Direct Mount Oval Chainring
$170.99 - $176.00
It’s undeniable that some riders’ pedaling styles benefit from oval chainrings, so SRAM has engineered the new X-SYNC 2 Oval chainrings to give them the advantage they want. They are the only oval option available with SRAM's genuine X-SYNC 2 teeth profile, so they are the only oval chainrings on the market that are 100-percent optimized for Eagle. - Direct Mount Type: Direct Mount SRAM - Drivetrain Speeds: 10, 11, 12 - Material: Aluminum - Ring Position/Type: Chain Retaining Single Ring - Chainline/Hub Compatibility: 135/142 MTB Hubs, 150/157 DH Hubs, 170/177 Hubs
SRAM Force Chainring
$56.99 - $208.00
- X-Range gearing technology gives you more range and a smoother gear progression, so you're always in the right gear - New tooth profiles for improved wear - More durable finish - 94mm BCD
SRAM Force X-Glide 11-Speed Chainring -110 BCD
$209.99
Replace worn out chainrings or change out gearing with SRAM's Force X-Glide Chainring. This solid ring is crafted from aluminum using SRAM's X-Glide tooth profiles for quick, responsive shifting. If you have a SRAM Force 22 compact crank (50/34), this is the ring for you.
Page 1 of 3 Next page