Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Wheels

DT Swiss 350 Road Front Hub
Direct power meets simplicity—running smoothly day-in and day-out. The 350 hub was developed according to the credo: Reliability meets simplicity. The simultaneous engagement of the ratchets and the resulting large engagement area provide reliability. The plugged construction allows easy maintenance without the need for tools. Adaptation to different axle standards or modification of the engagement angle is also possible with just a few manual steps.
Robert Axle Project BOB Trailer Thru Axle
Yes! A 12mm thru-axle adapter for BOB Trailers. These Robert Axles for BOB Trailers are specifically engineered to attach the proven BOB Trailer to your thru-axle-equipped bike. Take full advantage of your modern bike with 12mm thru-axles and harness the rigidity of the thru-axle to haul your BOB Trailer. Set out on any adventure, big or small. Great for off-road tours, trail building, hauling cargo, and more! - The axle shaft and axle end are precision CNC-machined. - The axle shaft is 7075 aluminum and hard black-anodized for rugged durability. - The axle ends are stainless steel which allows for mounting of the BOB Trailer bobbins. - No special tools required. The design allows for wheel installation or removal using your standard 5mm hex wrench. - Please note: This axle does not come with the BOB Trailer bobbins (those are available separately). Or, you can reuse your bobbins from the stock BOB Trailer Quick Release that came with your trailer. - Designed, built, and quality tested in the USA. Proven around the world.
Robert Axle Project Front Lightning Bolt-On Thru Axle
After years of mountain biking with thru-axles with bulky handles that seemed to strike every trailside obstacle, we needed a better option. Our Lightning Bolt-On thru axles offer a high-quality, simple, lightweight alternative to that bulky handle. Available in a range of sizes that fit both front and rear wheels on all types of thru-axle-equipped bikes. - Lightning is Better—Our front and rear Lightning Bolt-On axles offer a stronger, more durable, lower profile, and lighter weight option to replace your stock thru-axles. - Low Profile—No more bulky handles to strike trail obstacles or create wind drag. Aerodynamic design. - Light Weight—Our axles are internally bored to remove unnecessary material without compromising strength. - Easy to install—Our matching front and rear Lightning Bolt-On Axles require only a standard 6mm hex wrench for easy installation and removal. - Better Tolerances—Manufactured in the USA to the tightest tolerances using aerospace materials and CNC manufacturing. No longer will your axle loosen while riding. - The axle is precision CNC-machined in the USA from 7075 aluminum and hard-anodized for rugged durability. Our axles are built to the tightest standards in the industry. - No special tools required. Design allows for wheel installation and removal using your standard 6mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world.
Robert Axle Project Front Lightning Bolt-On Thru Axle for Focus R.A.T. Bikes
After years of mountain biking with thru-axles with bulky handles that seemed to strike every trailside obstacle, we needed a better option. Our Lightning Bolt-On thru axles offer the highest quality, simple, lightweight alternative to that bulky handle. - This axle is compatible with bikes that have a Focus R.A.T. thru-axle in the fork with 100 x 12mm front hubs. - The axle is precision CNC-machined in the USA from 7075 aluminum and hard-anodized for rugged durability. Our axles are built to the tightest standards in the industry. - No special tools required. Design allows for wheel installation and removal using your standard 6mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world.
Robert Axle Project Kid Trailer NAILD Thru Axle
Robert Axles for Kid Trailers are designed specifically to fit your 12mm thru-axle bike and allow attachment of any hitch-mounted trailer. These fit any trailer that has two wheels and a single point of attachment to the axle. This includes all the two-wheeled child, pet, and cargo trailers such as Thule, Chariot, Burley, Instep, Carry Freedom, and many more. Purchase our Kid Trailer axle for your bike, and share your stoke for cycling with your kids. Simplify your life by allowing quick and secure attachment of your trailer to your best and favorite bike. Enjoy the adventure. - This Kid Trailer axle is specific to bikes that have the NAILD thru-axle system and a Boost 148 x 12mm hub spacing. - Includes a M12 x 1.0 threaded nut to replace the NAILD nut that came with your bike. - This axle is compatible with Burley, Carry Freedom, Chariot/Thule, Croozer, Instep, and many more hitch-style trailers. - The axle shaft and axle end are precision CNC-machined. - The axle shaft is 7075 aluminum and hard black-anodized for rugged durability. - The stainless steel axle end allows for mounting of the hitch provided with your trailer. The threads are M10x1 (metric). - Hardware for attachment of the hitch is included; the hitch, itself, is not. - Designed, built, and quality tested in the USA. Proven around the world.
Robert Axle Project Kid Trailer Thru Axle
Purchase our Kid Trailer axle for your bike, and share your stoke for cycling with your kids. Simplify your life by allowing quick and secure attachment of your trailer to your best and favorite bike. Enjoy the adventure. Robert Axles for Kid Trailers are designed specifically to fit your 12mm thru-axle bike and allow attachment of any hitch-mounted trailer. These fit any trailer that has two wheels and a single point of attachment to the axle. This includes all the two-wheeled child, pet, and cargo trailers such as Thule, Chariot, Burley, Instep, Carry Freedom, and many more. - The axle shaft and axle end are precision CNC-machined. - The axle shaft is 7075 aluminum and hard black-anodized for rugged durability. - The stainless steel axle end allows for mounting of the hitch provided with your trailer. - Hardware for attachment of the hitch is included; the hitch, itself, is not. - No special tools required. Design allows for wheel installation and removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world.
Robert Axle Project NAILD Trainer Thru Axle
Our Trainer Axle is designed to adapt your thru-axle equipped bike to on-wheel trainers, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo, and many others. Our goal is to fit the thru-axle to your bike perfectly to minimize spacers and extra parts, providing a clean, high-performance axle for your bike. Train, warm up, and be race ready and fit for the season.
Robert Axle Project Rear Lightning Bolt-On NAILD Thru Axle
After years of mountain biking with thru-axles with bulky handles that seemed to strike every trailside obstacle, we needed a better option. Our Lightning Bolt-On thru axles offer a high-quality, simple, lightweight alternative to that bulky handle. Available in a range of sizes that fit both front and rear wheels on all types of thru-axle-equipped bikes. - This axle is compatible with bikes that use a NAILD thru-axle in the frame with 142 x 12mm spacing - The axle is precision CNC-machined in the USA from 7075 aluminum and hard-anodized for rugged durability. Our axles are built to the tightest standards in the industry. - No special tools required. Design allows for wheel installation and removal using your standard 6mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world.
Robert Axle Project Rear Lightning Bolt-On Thru Axle
After years of mountain biking with thru-axles with bulky handles that seemed to strike every trailside obstacle, we needed a better option. Our Lightning Bolt-On thru axles offer a high-quality, simple, lightweight alternative to that bulky handle. Available in a range of sizes that fit both front and rear wheels on all types of thru-axle-equipped bikes. - Lightning is Better—Our front and rear Lightning Bolt-On axles offer a stronger, more durable, lower profile, and lighter weight option to replace your stock thru-axles. - Low Profile—No more bulky handles to strike trail obstacles. Aerodynamic design. - Light Weight—Our axles are internally bored to remove unnecessary material without compromising strength. - Easy to install—Our matching front and rear Lightning Bolt-On Axles require only a standard 6mm hex wrench for easy installation and removal. - Better Tolerances—Manufactured in the USA to the tightest tolerances using aerospace materials and CNC manufacturing. No longer will your axle loosen while riding.
Robert Axle Project Rear Lightning Bolt-On Thru Axle for Focus R.A.T. Bikes
After years of mountain biking with thru-axles with bulky handles that seemed to strike every trailside obstacle, we needed a better option. Our Lightning Bolt-On thru axles offer a high-quality, simple, lightweight alternative to that bulky handle. Available in a range of sizes that fit both front and rear wheels on all types of thru-axle-equipped bikes. - Be free—No longer are you constrained by the proprietary Focus R.A.T. axle. Simply replace the R.A.T. nut with our threaded nut and thru axle. A complete solution for a standard threaded axle for your R.A.T.-equipped bike. - Lightning is Better—Our front and rear Lightning Bolt-On axles offer a stronger, more durable, lower profile, and lighter weight option to replace your stock thru-axles. - Low Profile—No more bulky handles to strike trail obstacles. Aerodynamic design. - Light Weight—Our axles are internally bored to remove unnecessary material without compromising strength. - Easy to install—Our matching front and rear Lightning Bolt-On Axles require only a standard 6mm hex wrench for easy installation and removal. - Better Tolerances—Manufactured in the USA to the tightest tolerances using aerospace materials and CNC manufacturing. No longer will your axle loosen while riding.
Robert Axle Project Trainer Thru Axle
Our Trainer Axle is designed to adapt your thru-axle equipped bike to on-wheel trainers, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo, and many others. Our goal is to fit the thru-axle to your bike perfectly to minimize spacers and extra parts, providing a clean, high-performance axle for your bike. Train, warm up, and be race ready and fit for the season. - When it’s time for your race or time to head outside, simply remove your bike from the trainer, remove the drive side axle end and go. Our axle is suitable for use on or off the trainer, indoors or out. - The axle shaft and axle ends are precision CNC-machined from 7075 aluminum and hard-anodized for rugged durability. - No special tools required. Design allows for installation or wheel removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world. Important: Before you order, make sure your specific trainer will accommodate the width of your modern thru-axle-equipped bike. Measure your trainer at the widest setting and measure the outside width of your bike frame. Our the trainer axle ends will extend past your frame on each side.
Robert Axle Project Trainer Thru Axle for Cervelo R.A.T. Bikes
Our Trainer Axle is designed to adapt your thru-axle equipped bike to on-wheel trainers, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo, and many others. Our goal is to fit the thru-axle to your bike perfectly to minimize spacers and extra parts, providing a clean, high-performance axle for your bike. Train, warm up, and be race ready and fit for the season. This axle will replace the R.A.T. axle found on all Cervelo R.A.T. equipped bikes. In addition to this axle, we include our replacement derailleur hanger with traditional threads. This axle combined with the replacement derailleur hanger will provide a complete threaded thru-axle system. Our derailleur hanger matches the geometry and construction of the stock derailleur hanger in every way for crisp shifting performance. - The axle shaft and axle ends are precision CNC-machined from 7075 aluminum, and hard-anodized for rugged durability. - No special tools required. Design allows for wheel installation or removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world.
Robert Axle Project Trainer Thru Axle for Focus R.A.T. Bikes
Our Trainer Axle is designed to adapt your thru-axle equipped bike to on-wheel trainers, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo, and many others. Our goal is to fit the thru-axle to your bike perfectly to minimize spacers and extra parts, providing a clean, high-performance axle for your bike. Train, warm up, and be race ready and fit for the season. - This axle is specific to bikes with Focus R.A.T. thru-axles and 12 x 142. Includes a replacement R.A.T. nut. - When it’s time for your race or time to head outside, simply remove your bike from the trainer, remove the drive side axle end, and go. Our axle is suitable for use on or off the trainer, indoors or out. - The axle shaft and axle ends are precision CNC-machined from 7075 aluminum, and hard-anodized for rugged durability. - No special tools required. Design allows for wheel installation or removal using your standard 5 mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world.
Spank 350 Straightpull 27.5-inch Front
Hand-built to A-Class specifications, the 350 wheels with SPANK Hex Drive hub is the premium lightweight performance offering from the SPANK wheelhouse and is trusted by pros on the Enduro World Series circuit. - Unique profile with low sectional height & wide width adds radial compliance & lateral stiffness - Improved radial compliance for better traction over bumps & chatter while reducing negative feedback to the rider gives enhanced performance & comfort - 30mm internal width is versatile, fitting tires from 2" to 2.6" and allows plus-size tire use without negative squaring off of tire profiles
Spank 350 Vibrocore Straightpull 27.5-inch Front
The low-profile, radially compliant alloy rim injected with SPANK's award-winning Vibrocore to add torsional strength and lateral stiffness offers a smooth and highly responsive ride feel. Hand-built to A-Class specifications, the 350 Vibrocore wheels with SPANK Hex Drive hub is the premium offer from the SPANK wheelhouse and is trusted by pros on the UCI DH World Cup and Enduro World Series circuit. - Unique profile with low sectional height & wide width adds radial compliance & lateral stiffness - Improved radial compliance for better traction over bumps & chatter while reducing negative feedback to the rider gives enhanced performance & comfort - Vibrocore inner well reduces the transmission of harmful vibration frequencies & increases the fatigue life of the rim - 30mm internal width is versatile, fitting tires from 2" to 2.6" and allows plus-size tire use without negative squaring off of tire profiles
Spank Flare 24 Vibrocore 650B Front
- Disc-specific, tubeless-ready clincher rim with Vibrocore, optimized for Gravel, Adventure, and MTB Cross Country use - Vibrocore inner well reduces the transmission of harmful vibration frequencies, improving rider comfort and increasing the fatigue life of the rim - Low-profile 16.5mm depth and wide 27.5mm outer width enhance radial compliance, improving traction while reducing negative feedback to the rider - Bead Nip tubeless bead seats provide reliable tubeless performance, even at low pressures
Spank HEX Drive Microspline Freehub Pawl Service Kit
Spank Pawl and Spring Replacement Kits - Kit to service Spank rear hubs - Fits Spank Spike/Spoon or Oozy rear hubs - Fits HEX Micro Spline Hubs
Spank HEX Gravel Front Hub
- Highly weight-optimized front hub, ideal for Gravel and XC. - 28mm-diameter bearings minimize overall weight and allow adaptability up to 15mm thru axles - Unique flange design reduces dish requirement and minimizes tension range between drive-side and non-drive-side spokes - Compatible with 28 HEX front hub adapters only - Advanced seal system improves prevention of bearing contamination
Spank HEX J-Type R150/157 Rear Hub
- SPANK's HEX DRIVE 102T technology delivers 3.5° engagement, for almost instant pickup - 6 independent pawls with 3 steps per pawl, work in unison, meaning 18 engagement points per click - Bite-Block Alloy HG and XD Freehub bodies resist damage from cassettes without the weight penalty of steel - Unique flange design reduces dish requirement and minimizes tension range between drive-side and non-drive-side spokes - Advanced seal system improves prevention of bearing/drive system contamination
Spank Spoon 32 27.5-inch Front
- The most versatile, bombproof, all-purpose rim - 32 holes with an inner width of 26.5mm and outer width of 32mm - The corrugated rim center adds exceptional strength, making it more rigid and allowing the rim to be wider without adding material - Shot-peened finish increases fatigue life and durability - Delivers exceptional strength and stiffness at a remarkable value
WTB CZR i30 29-inch TCS 2.0
Our flagship CZR carbon rims deliver minimal rotational weight and fine-tuned compliance to make you feel at one with the terrain. Reinforced spoke holes, TCS 2.0 technology, an asymmetrical design, and two years of development make them the most dependable carbon rims on the market. CZR rims set themselves apart from the pack by providing unbeatable strength and ride quality at a more affordable price. Available in i23 and i30 inner widths to satisfy the needs of both gravel and mountain riders. FEATURES: - Reinforced spoke beds, proven 4D angled spoke hole drilling, and an asymmetrical design…all the necessary ingredients of an incredibly durable rim. - Two internal width options… 23mm for the gravel-centric and 30mm for the mountain-focused. - When compared to the competition, lab tests proved our CZR carbon rims to be lighter overall, more impact resistant, and laterally stiffer while remaining vertically compliant. To be precise, our CZR i23 rims were 38% more impact resistant than their direct competition while our CZR i30 rims were 10% more impact resistant. USAGE: Adventure Road / Gravel / Cross-Country / Trail / Enduro
Zipp 3ZERO MOTO 29-inch Tubeless Rear Rim
Zipp's 3ZERO MOTO carbon rims are inspired by moto to provide riders with the control and durability required for pure speed. Moto remains a powerful source of inspiration for good reason. Based in the racing hotbed of Indy, Zipp for more than three decades has used motorsports as an inspiration to develop pioneering carbon cycling innovations. Our single-wall approach, what we call Moto Technology, allows the rims to "pivot" from either side of the spoke bed while traversing rough terrain. As the wheel encounters obstacles, each edge of the rim is designed for compliance, creating the feel of extra suspension. For the rider, that means durability and control for greater speed. Moto Inspired. Control + Durability = Speed. - Higher impact resistance - Reduced chance of pinch flatting - More traction in rough corners - Smoother ride in rocky terrain - Ability to run lower tire pressure - Reduced rider fatigue - TyreWiz tire-pressure monitoring device - Frustration-free tire installation - Rim is designed for compliance, creating the feel of extra suspension
Wheels Manufacturing Inc. Outer Axle Nut
$1.99 - $12.99
Wheels Manufacturing Outer Axle Nuts are high-grade steel nuts that provide secure wheel fixing for solid-axle wheels. - 14mm x 1mm (1411-AN) sold in pairs - All others sold individually
Stan's NoTubes Presta Removeable Valve Core
$4.99
Stan's No Tubes' Presta Removable Valve Core is a replacement valve core for Stan's No Tubes Presta valve stems and Presta valve equipped rim strips.
Blackburn EX-1 Quick Release
$7.99
EX-1 Disc Quick Release replacement compatible with Expedition 1 Disc Rack.
Zipp Disc Wheel Valve Cover Patches
$8.99
A simple solution for completing the Zipp aerodynamic package by covering the valve access hole on most disc wheels. Black, self-adhesive oval patches with the Z logo, in a package of five.
Zipp AM Rim Tape
$9.99
Package comes with two pieces of rim tape for use with the Zipp clinchers. Woven nylon material. Tape is extra thin with a thickness of 0.5 mm. Note: For Zipp 700c and 650c aluminum/carbon hybrid clichers, use the 16 mm rim tape. For Zipp 30 wheel set use 18mm but for the wider Firecrest and Firestrike carbon clinchers use the 20mm x 1/2mm rim tape.
Velox Jantex Adhesive Tubular Rim Tape
$10.50
- High performance adhesive tape, a great pairing with Velox Cement - Each roll is usually adequate for gluing two tubular tires - Protects tube from spoke/nipple/rim puncture
49°N Spoke Ornaments
$10.99
Pack of 30 ornaments. - 5 different colors - Fits all standard spoke diameters
Spank HEX Rear Hub HG/HGR Replacement Seal Kit
$10.99
HEX Rear Hub HG/HGR Replacement Seal Kit
Vittoria Special Rim Tape
$10.99
This lightweight, high-pressure rim tape offers great protection against spoke hole flats and is easy to install. This Italian-made tape is light and thin, so it will not inhibit tire fitting. Nylon elastic material is used to ensure a snug fit without movement.
Spank Oozy/Spike Rear Hub 3 Pawl & Spring Kit
$12.99
Replacement Pawls for all Oozy hubs.
Stan's NoTubes Neo Hub Spring and Pawl Kit
$12.99
Replacement springs and pawls. Includes 6 pawls, 6 springs and 1 plastic retaining ring that holds the pawls in place even during disassembly to ensure you're never searching the floor for tiny springs.
Wheels Manufacturing Inc. CN-R098 Cone
$13.99
Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life. - Compatible with Shimano Rear 10mm x 1 axle - Shimano Right Rear Cone - Cone Wrench Size: 15mm - Threads: 10mm x 1 - Diameter: 17.0mm - Length: 9.0mm - 1 cone per bag COMPATIBLE HUBS: - XT M750, 9-spd Rear - XT M760, 9-spd Rear - XT M765, 9-spd Rear - Deore LX M570, 9-spd Rear
Cinema BMX CF Front Hub Guard
$14.99
The CF front hub guard presses directly over existing Cinema hub hardware to protect your hub and spokes on grinds. Injection molded from super durable nylon material, this guard can handle some serious abuse while still being affordable. - Material: Nylon - Fits: Cinema FX, VX2 and ZX Front Hubs and Wheels (2017 and later) - Side: Either Side - Weight: 0.9 oz
Wheels Manufacturing Inc. CN-R084 Cone
$14.99
Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life. - Fits: Joytech 9mm x 26, front hub - Compatible with 9mm x 26 axle - Cone Wrench Size: 13mm - Threads: 9mm x 26 - Diameter: 15.0mm - Length: 12.8mm - 1 cone per bag - Note: O-ring / seal not included. COMPATIBLE HUBS: - Joytech 9mm x 26, front hub - Taiwanese hubs with 9mm x 26 axle - 105 SC 1055 8-speed Rear - 105 SC 1056 7-speed Rear - XT-II M732 7-speed Rear
Wheels Manufacturing Inc. CN-R086 Cone
$14.99
Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life. - Fits: JoyTech 9mm x 1, front "parallax" style hub - Compatible with 9mm x 1 axle - Cone Wrench Size: 13mm - Threads: 9mm x 1 - Diameter: 15.0mm - Length: 11.0mm - 1 cone per bag COMPATIBLE HUBS: - JoyTech 9mm x 1, front "parallax" style hub - Taiwanese hubs with 9mm x 1 axle
49°N Clamper Release Skewers
$15.99
A simplified quick release, utilizing an exposed/external split cam that straddles the end of the skewer. - Lighter and both easier and less expensive to manufacture, these external cam quick release levers represent an excellent value - Fits both road and mountain bike frames & forks with 100/130/135mm hub spacing - Construction: Chromoly steel skewer with alloy cam/lever and plastic/steel acorn-nut - Sold as a front & rear matching pair - Lengths: 133mm (FR) / 169mm (RR) - Weight: 58g (FR) / 64g (RR)
Muc-Off No Puncture Hassle Tubeless Sealant
$15.99 - $59.99
Looking for a super lightweight but badass tubeless sealant? Boom, you've just found it my friend! No Puncture Hassle performs under the most brutal race conditions. The cutting-edge microfiber molecules fill the bigger holes and tears, whilst the advanced latex forms a strong seal instantly. The formula also contains a unique UV detection system that highlights any punctures you haven’t seen during your ride. Developed with the world's top downhillers and pro peloton teams, to give you the finest tire sealant available. It's non-corrosive and easily washes off with water. Compatible with tubeless ready and full UST wheels/tires, No Puncture Hassle works from 15psi-120psi and temperatures from -20°C to +50°C. Our pouch is designed to fit your Presta valve perfectly and is ideal to add to your toolkit or ride pack for emergency top ups on the go! - For Downhill, Enduro and Road tires - Seals tears and holes up to 6mm - Contains UV puncture detection - Won't dry out or ball - Works from 15psi-120psi and temperatures from -20°C to +50°C - Biodegradable
DT Swiss Narrow Base Tubeless Valve
$16.47
Tubeless valves for DT Swiss rims for repair or replacement.
Spank Spoon Pedal Bearing/Bushing Kit
$16.99
Replacement bearings and bushings specific to Spoon 90 (Small) and 100/110 (Medium and Large) pedals. Eliminates play that can develop over time, and revives performance. Includes: - Sealed Bearing x2pcs - 10mm IGUS Bushing x2pcs - Green Friction Seal x2pcs - Locknut - O-ring x 2pcs
Zipp Sapim CX-Ray Straight Pull Spokes and Nipples
$17.00 - $23.99
- Replacement straight pull spokes for Zipp 88 (Front) and 188 (Rear) Hubs
DT Swiss Pro Head Brass Nipples
$19.99 - $31.99
Developed for short spokes with a large deflection angle. DT Pro Head nipples are designed for short spokes with a large angle of deflection, such as for e-bike use. Through the spherical contact surface, the nipple aligns automatically with the angle of the spoke, which leads to consistent power transmission. Note: brass nipples are not approved for children's products in the USA. See attached warning! All-brass nipples are recommended for e-bike use. - Weight: starting at 59g for 64 nipples.
Spank Fratelli Tubeless Ready Tape
$19.99
SPANK Industries Fratelli Tape is a special ultra-light polyamide, adhesive tubeless conversion tape, which is ideal for SPANK's patented OohBah profile rims. Thicker, less pliable tapes are often difficult or impossible when taping complex rim profiles. Fratelli tape makes tubeless set up simple, and adapts well to a variety of rim types, including sleeved and welded joints. 25mm width tape is suggested for rims up to 29mm internal width, and 30mm tape for rims 30mm internal width and greater. With adhesive properties unaffected in a wide temperature range, Fratelli tape is also perfect for winter riders, or those in exceptionally hot environments. - Material: Ultra Thin Polyamide - Width: 25mm or 30mm - Features: high temperature range adhesive, ideal for complex rim profile Installation: - Affix tape all the way around on the right side snug against the bead hook - Then repeat a second circumference around the left side, providing double-thick coverage over the spoke holes - Use a red-hot awl or similar to pierce the valve hole
Spank Spike DH Rear Hub 150/157mm Steel Axle Shaft
$22.99
Replacement Steel Axle Shaft for SPIKE DH R150 Rear Hubs. Compatible with 12x150mm hubs and those already converted to 12x157mm. - Material : Steel - Weight (g): ±81 - Compatibility: SPIKE DH 12x150mm / 12x157mm (converted) Rear Hubs
WeThePeople Helix Hub Guard
$22.99
WTP's Helix hub guards are designed to work on The Helixline of hubs, replacing the cones for a perfect fit without having to spread your dropouts. - Includes heat-treated chromoly adaptor to replace hub cone nuts for a perfect fit - Rear Hub guards are compatible with Helix V1 and Helix V2 freecoaster hubs and many other "KHE" style freecoasters on the market
49°N Replacement Freehub Body for Quick Release Hubs
$24.99
Replacement freehub body for all loose-ball 49N 10mm Quick-Release rear hubs. - 11sp Road compatible freehub body with supplied 1.85mm spacer for full 8/9/10/11sp road & mountain compatibility - Requires axle removal to fit - Weight: 160g
DT Swiss Pro Head Spoke Reinforcement Washers for SPLINE One
$24.99
Pro Head Reinforcement System (PHR) has a larger and more spherical contact area and is designed to balance loads transferred to the rim. The PHR system acts as a ball and socket interface, allowing the spoke to pivot into alignment while maintaining even, consistent contact during installation in order to follow the perfect trajectory from the hub to the rim.
DT Swiss Standard Aluminum Nipples
$24.99 - $66.99
The buyer's choice for wheel builders looking to save weight. The nipples are available with or without DT Pro Lock, a patented liquid inside the nipple thread that makes the connection between the nipple and spoke extremely durable. It pairs perfectly with any wheel, though all-brass nipples are recommended for e-bike use. - Weight: starting at 20g for 64 nipples
SRAM X0 Hub Conversion Caps
$24.99
SRAM's X0 conversion caps are the ticket for converting your X0 hubs to a different axle type.
49°N Vise Quick Release Skewers
$25.99
A modern take on the classic internal/enclosed cam design as invented by the late, great Tullio Campagnolo. - Internal cam design exerts a far greater vise-like grip vs. external/exposed cam QR lever designs for a more secure fit - Fits both road and mountain bike frames & forks with 100/130/135mm hub spacing - Construction: Chromoly steel skewer with alloy lever and plastic/steel body & acorn-nut - Sold as a front & rear matching pair - Lengths: 133mm (FR) / 169mm (RR) - Weight: 57g (FR) / 61g (RR)
Stan's NoTubes Rim Tape
$25.99 - $39.99
Can be used with Stan's ZTR rims to make them airtight or used as a lightweight rim tape in any rim. A single 10-yard roll will tape five 26-inch rims or four 29-inch rims or two wide road clincher rims. 21mm width fits: - ZTR Olympic - ZTR Iron Cross - ZTR 355 - ZTR Alpine - ZTR Crest - ZTR Alpha 340 (2 layers) - ZTR Alpha 400 (2 layers) - Most road clincher rims 25mm width fits: - ZTR 355 (26", 650b, 29") - ZTR Crest - Crest MK3 - ZTR Arch EX - ZTR Flow EX - Crest S1 27mm width fits: - ZTR Flow EX - ZTR Bravo - ZTR Hugo 52mm - Arch S1 - ZTR Rapid 28 - ZTR Rapid 30 - Arch MK3 30mm width fits: - ZTR Flow MK3
Stan's NoTubes Tubeless Valve Stems
$25.99
Use Stan's Tubeless Valve Stems when you're converting standard rims to tubeless via the taping method. These also have a removable core for easier application of tire sealant. Note: Schrader valve is for non-stepped Hugo rims. If your Hugo rim decal reads: - MAX RIM PRESSURE: 2.8 tires: 26psi, 3.0 tires: 24psi - ERD 615, 622x49.9, 29 in x 52.3mm Your rim has a stepped valve and is not compatible with this Schrader valve.
Zipp 77/177 Disc Conversion Caps
$25.99
Wheel Conversion Caps for Zipp 77/177 Disc hubs. Converts your Zipp 77 or 177 hubs to nearly any frame standard.
Roval Tubeless Valves
$26.00
Roval's rim-specific Tubeless Valves are designed to match Specialized's rim profiles and provide a better seal than previous generation valves. - Constructed of lightweight aluminum - Removable valve core - Mated with a seal which is specific to different rim models: - MY14 Control SL = black rim bed shaped seal - MY15 Control Carbon/Aluminum = red rim shaped seal - MY15 Traverse SL/Aluminum = black O-ring seal
Wheels Manufacturing Inc. Freewheel/BB Spacer
$26.99
Machined aluminum spacers for freehubs. Great for fine tuning freewheel and cassette placement or improving chainline. Also good for bottom bracket spacing with BSA BB cups. - Inner Diameter: 35.0mm - Outer Diameter: 40.7mm - Material: Aluminum - Finish: Polished - Bags of 10
Stan's NoTubes Neo Replacement Rear Axle
$27.26 - $29.99
Replacement rear axle for Neo and Neo Ultimate hubs. High-precision center-less ground treatment ensures perfect bearing fit.
Kink Universal Freecoaster Guard
$27.50
The Kink Universal Freecoaster Guard is designed to fit with most modern freecoaster hubs. It features a threaded chromoly core that replaces the hubs existing cone nut(s) and also includes a spacing washer for hubs using a wider cone. The nylon guard itself fits over the chromoly core and is injection-molded from ultra-durable nylon material. This guard fits on the non-drive side only.
Spank HEX Boost Rear Hub Alloy Axle Shaft
$27.99
Replacement Alloy Axle Shaft for HEX J-Type and Straightpull Boost 148/141mm Rear Hubs. Compatible with: - HEX J-Type 32H and Straightpull Boost 148mm rear wheels Not compatible with: - Non-Boost HEX rear wheels - SPIKE/OOZY/SPOON hubs
Spank HEX Drive Freehub Pawl Service Kit
$27.99
Replacement XD/XDR/HG/HGR freehub Pawls & Springs & Pawl Cap - Compatibility: HEX Drive XD/XDR/HG/HGR freehubs - 6x pawls, 6x spring, and 1x Pawl cap for service
Page 1 of 7 Next page